EN
3
1. SETTING THE TIME
You will need to set the time when you switch on the
appliance for the first time: “AUTO” and “0.00” flash on
the display.
To set the time of day, press buttons and at the
same time: Set the time of day using the
and
buttons.
Please note: To change the time of the day afterwards for
example following lengthy power outages, you will need to
reset the time.
2. SETTING THE TONE
Having selected the desired time value, press the time
button: The display shows “ton 1”.
To select the desired tone, press button , then press
the time button to confirm.
3. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it. Heat the oven to 250 °C for about one hour,
preferably using the “Convection Bake” function. The
oven must be empty during this time.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
USING THE APPLIANCE FOR THE FIRST TIME
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require.
2. ACTIVATE A FUNCTION
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
To interrupt the function at any time, switch off the
oven, turn the selection knob and the thermostat knob
to
and .
3. PREHEATING
Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: at this point, place the food inside
and proceed with cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
. PROGRAMMING COOKING
After selecting and activating the function, it is
possible to set the duration.
DURATION
Press the time button: the
symbol flashes.
Press the time button again: the display shows DUR
and AUTO flashes.
Set the duration using the buttons and . After a
few seconds, the display shows the time of the day
while AUTO remain lit, confirming the setting.
To view the remaining cooking duration press the
time button for at least 2 seconds.
To change it, if necessary, press it again a second time,
using
and buttons to modify the duration.
At the end of cooking, the symbol
switches off, an
alarm sounds while AUTO flashes on the display.
DAILY USE
(8 pages)
(48 pages)
(8 pages)
(4 pages)
(10 pages)
(4 pages)
(18 pages)
(3 pages)
(30 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals