Bauknecht BCVM 8100/ PT Instruction for Use Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
GB38
SETTINGS
1. To modify some display parameters, select “SETTINGS” from the main menu by turning the
“Functions” knob.
2. Confirm by pressing the button : the display shows the parameters that can be modified
(language, acoustic signal volume, display brightness, time of day, energy saving).
3. Select the setting to be changed by turning the “Browse” knob.
4. Press the button to confirm.
5. Follow the instructions on the display to modify the parameter.
6. Press the button ; a message confirming the operation appears on the display.
N.B.:When the oven is switched off, if the ECOMODE (energy saving) function is selected (ON), the display
switches off after a few seconds. If, on the other hand, the function is not selected (OFF), after a few seconds
the display is merely dimmed.
PURECLEAN™ CLEANING CYCLE
To keep the oven in best condition, carry out the PURECLEAN™ cleaning cycle after each use. The cycle
takes 35 minutes, including a cooling stage, and must be carried out as follows:
For the description of this function, see the section CLEANING and the functions table on page39.
1. Proceed with oven cold.
2. Wet the cellulose cloth provided under running water and wring it out so that it does not drip.
3. Open the oven door and remove the enamelled accessories.
4. Cover the bottom of the oven completely with the cellulose cloth.
5. Distribute 350 ml of water evenly on the cellulose cloth. A smaller or greater amount of water could
compromise proper functioning of the cycle.
6. Close the oven door.
IMPORTANT:To prevent steam coming out, do not open the door during the cycle.
7. Select the symbol with the Functions knob: the word PURECLEAN™ appears on the display.
8. Press the button to confirm the choice and start the cleaning cycle. To prevent steam coming
out, do not open the door during the cycle.
9. At the end of the cycle, remove the cellulose cloth and eliminate any residual water in the oven.
10. Then start cleaning using the sponge provided, moistened with hot water (cleaning could be
compromised if delayed by more than 15 minutes).
Particularly stubborn grime
To eliminate particularly stubborn grime, repeat the PURECLEAN™ cycle and add a few drops of neutral
detergent while removing the grime.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press the buttons and together for at least 3 seconds. If activated, the functions of the
buttons are locked and the display shows a message and the icon . This function can also be activated
during cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the
oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously selected
function will have to be reset.
35 minutes water cleaning
Pureclean
1/1
Insert the cloth
& press
TIME
Cleaning
02:59
TIME
Cleaning
00:00
END TIME
15:00
END TIME
15:00
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 117 118

Comments to this Manuals

No comments