Bauknecht WM 10423 ZEN CD Use and Care Guide download pdf (Page 12)

HOW TO USE

THE APPLIANCE

If you plug in the washing machine, it will switch on

automatically. You will be asked to set the desired

language for the display.

Press the UP or DOWN key to select the desired

language, and conrm by pressing the OK key.

Afterwards you can adapt the water hardness

setting of your washing machine to your regional

water hardness. This is recommended in order

to optimize the Auto dosing function. Choose

between soft / medium / hard and conrm by

pressing the OK key.

Finally determine if you want to use Tank 2 of the

Auto dosing system for softener or detergent (refer

to sections AUTO DOSING).

All settings which you do during the initial set-up

can be changed again later, if needed.

To remove any residues from the manufacturing

process:

1. Select programme “Cotton” with temperature

95°C.

2. Add a small amount of detergent to the

manual dosing compartment of the detergent

dispenser (maximum 1/3 of the quantity the

detergent manufacturer recommends for lightly

soiled laundry).

Deactivate the buttons for Auto dosing (Tank 1 and

Tank 2): press them so that the button light goes

o.

3. Start the programme without adding any

laundry.

See section “DAILY USE” for more information on

how to select and start a programme.

AUTO DOSING FUNCTION

The detergent dispenser of the washing machine is

equipped with a two tanks system for the automatic

dispensing of liquid detergent and softener.

Before using this function, follow the instructions

in the USE AND CARE GUIDE/AUTO DOSING – FIRST

USE to:

1. Set the correct water hardness level

2. Set tank 2 content. By default, Tank 1 is set for a

detergent (your main detergent), and Tank 2 is set

for fabric softener. If you do not use fabric softener,

set Tank 2 for another detergent.

3. Check/adjust the preset dosing quantities.

By default, the system comes with the following

dosing values:

• 80 ml detergent for Tank 1

• 30 ml softener for Tank 2

You need to adjust these preset dosing values to

the dosing values reported on the detergent and

softener package that you intend to use.

After the Auto Dosing function is set for use, ll the

tanks with the appropriate content and install the

labels on the tanks accordingly, as explained in the

USE AND CARE GUIDE / AUTO DOSING – FIRST USE.

FIRST TIME USE

1 ... 11 12 13 ... 56

Comments to this Manuals

No comments

Bauknecht WM 10423 ZEN CD Use and Care Guide Page 12

Comments to this Manuals

Related products and manuals for Washing machines Bauknecht WM 10423 ZEN CD