Bauknecht WATK Prime 10716 User's Guide Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
16
HOW TO RECEIVE THE INSTRUCTIONS FOR USE
> Phone the After-Sales Service
> Use this QR Code
> Download the guide from the Bauknecht website
http://docs.bauknecht.eu
To do this, you need to enter the correct commercial code of the
product indicated on the adhesive label.
MAINTENANCE AND TROUBLESHOOTING GUIDE
See the Instructions for use for instructions on maintenance
procedures and troubleshooting problems.
TECHNICAL DOSSIER
The technical dossier containing energy consumption gures may be
downloaded from the Bauknecht website http://docs.bauknecht.
eu
CONTACTING THE AFTERSALES SERVICE
When contacting the After-Sales Service, you will need to be able to
provide the codes indicated on the adhesive label on the inner side
of the door. The telephone number is indicated in the warranty
booklet.
WWW
001
Whirlpool Europe s.r.l.
Viale G.Borghi 27
21025 Comerio - Italy
If the current adjustment can be neither set nor changed, the
display will show “No Selection” or “No Change”.
EASY IRON
By selecting this option, the wash and spin cycles will be
modied in order to reduce the formation of creases.
At the end of the cycle the Washer-dryer drum will rotate
slowly; the START/PAUSE button Led will ash slowly and the
wording “Post care will appear on the display. To end the cycle
press the START/PAUSE button.
DELAY TIMER
To set the selected programme to start at a later time, press the
button to set the desired delay time. To cancel the delayed
start, press the button again until the value “-- h” is shown on
the display.
h.
LOCK BUTTON
to lock the control panel, press and hold the button for
approximately 2 seconds. When the display visualises “KEY
LOCK ON” the control panel is locked (with the exception of
the button). This prevents unintentional changes to
programmes, especially with children near the machine.
To unlock the control panel, press and hold the button
for approximately 2 seconds.
Page view 7
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments