Bauknecht KGNF20P A3+ PLATIN Use and Care Guide download pdf (Page 13)

FIRST TIME USE

INSTALLATION

HOW TO USE

THE APPLIANCE

After plugging the appliance to the mains, it starts

the operation automatically.

After starting the appliance, wait at least 4-6 hours

before placing food into the appliance.

FRIDGE TEMPERATURE LEDs

To adjust the Fridge Temperature, press the Fridge

°C button. The Fridge Temperature can be adjusted

between +2°C and + 8°C, as shown by the Fridge

Temperature LEDs.

FREEZER TEMPERATURE LEDs

To adjust the Freezer Temperature, press the Freezer

°C button. The Freezer Temperature can be adjusted

between -16° C and -24°C, as shown by the Freezer

Temperature LEDs.

When the appliance is connected to the power

supply, the display lights up and all the icons appear

on the display for approximately 1 second. The

default (factory) values of the fridge compartment

settings light-up.

HOW TO START THE APPLIANCE

INSTALLING SINGLE APPLIANCE

To guarantee adequate ventilation, leave a space on

both sides and above the appliance.

The distance between the rear of the appliance and

the wall behind the appliance

should be at least 50mm.

A reduction of this space will increase the Energy

consumption of product.

INSTALLING THE SPACERS

Fit the spacers on the upper and bottom part of

condenser (according the drawing) at the rear of the

appliance.

TEMPERATURE SETTING

50mm

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Bauknecht KGNF20P A3+ PLATIN Use and Care Guide Page 13