Bauknecht CTAC 8780AFS NE Use and Care Guide download pdf (Page 6)

Use & Care guide

FIRST TIME USE

DAILY USE

HOW TO USE THE APPLIANCE

ACCESSORIES

POTS AND PANS

Only use pots and pans made from ferromagnetic

material which are suitable for use with induction

hobs. To determine whether a pot is suitable,

check for the

symbol (usually stamped on the

bottom).A magnet may be used to check whether

pots are magnetic. The quality of the pots and pans used may aect

performance and cooking results.

EMPTY POTS OR POTS WITH A THIN BASE

Do not use empty pots or pans when the hob is on.

The hob is equipped with an internal safety system that constantly

monitors the temperature, activating the “automatic o” function

where high temperatures are detected. When used with empty pots

or pots with thin bases, the temperature may rise very quickly, and the

“automatic o” function may be triggered with a slight delay, damaging

the pot or pan. If this occurs, do not touch anything, and wait for all

components to cool down.

NOOK

If any error messages appear, call the service centre.

MINIMUM DIAMETER OF POT/PAN BASE FOR THE DIFFERENT

COOKING AREAS

To ensure that the hob functions properly, the pot must cover one or

more of the reference points indicated on the surface of the hob, and

must be of a suitable minimum diameter.

Positioning of accessoryMinimum diameter

centred on 1 point

2 points covered

3 points covers

4 points covered (horizontal)

4 points (2 + 2) covered (vertical)

10 cm

19 cm

sh kettle/wire rack

26 cm

The hob settings can be changed at any time. To change the settings,

click on the

symbol that appears on the manage functions display.

From the settings menu, you can:

• select the language;

• adjust the brightness;

• adjust the volume of the sound alerts;

• adjust the button tones;

• adjust the power of the hob;

• restore the factory settings of the hob;

• check the software version installed.

If a power failure occurs, the settings are maintained.

ADJUSTING THE POWER OF THE HOB

The maximum power level of the hob can be set from the settings menu,

in accordance with requirements, or with the timer duration.

The power levels available are: 2.5kW – 4.0kW – 6.0kW – 7.4kW.

SWITCHING THE HOB ON/OFF

To switch the hob on, press the on button for approx. 1second until the

displays light up.

The hob will be automatically deactivated after 10seconds if you do not

select a function within this time.

The hob turns o if you press any button for more than 10 seconds.

To switch o, press the same button until the displays switch o. All the

cooking zones are deactivated.

If the hob has been in use, when you switch it o, all cooking zones will

be deactivated, and the residual heat indicator “H” will remain lit until

the cooking zones have cooled down.

SELECTING THE COOKING ZONE

The desired cooking zone can be selected from the left-hand display, by

pressing the corresponding pane. On all the not selecetd zones a lightly

stripe will appear.

SELECTING THE FLEXIBLE AREA

The exible area is the area in which several of the cooking zones overlap,

and can be used as a single cooking zone.

To create a exible area:

Select multiple panes or slide your nger across, gradually joining the

panes together.

To divide a exible area:

Press and hold the pane corresponding to the zone that you want to

separate for 3 seconds. Alternatively, press the “divide zone” button

that appears in the manage functions display.

When the cooking zone is divided, the same level of power is set for

each of the separate zones.

If all the selected cooking zones are not covered by the pot in 30 seconds,

a dense striped will appear on the left-hand display. It’s possible to

reactivate that area with the “place a pot” command usign the right-

hand display.

1 2 3 4 5 6 7 ... 16

Comments to this Manuals

No comments

Bauknecht CTAC 8780AFS NE Use and Care Guide Page 6

Comments to this Manuals

Related products and manuals for Hobs Bauknecht CTAC 8780AFS NE