EN -1-
Chart
(see at right for options description)
PROGRAM SELECTION
BUTTON
Push “P” button (repeatedly)
until selected program number
is shown on the display
(P1...Px) - see “Table of
programs” below.
START/RESUME BUTTON
Push this button to start the selected program: the
indicator lights up and goes off at the end of the program.
When the door is opened during a washing cycle, the
cycle is temporarily paused: the Start indicator blinks.
To resume the cycle push Start button and close
the door within 3 seconds.
CANCEL/OFF BUTTON
Push this button to switch off the control panel.
If pressed when a program is running it cancels the
program ongoing draining water for 1 minute
(0:01 is shown into the display).
If pressed when the dishwasher is switched off,
it drains any possible liquids from dishwasher
(1 minute process).
1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without any options) and may vary depending on
conditions. Differences of up to 20 minutes are possible with sensor programs as a result of the appliance’s automatic calibration system.
2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on the
EN/Standard loading comparison test and other tests, contact the following address: “contact_bk@bauknecht.com”.
* Power consumption in: Left-on mode: 1.08 W / Off-mode: 0.40 W.
Table of programs
Deter-
gent
Consumption
Drying
Phase
Programs
Available
options
Loading instructions
Litres kWh
Minutes
1)
P1
Sensor
PowerClean
®
Plus
40-70°C
Delay
PowerClean
®
Antibacterial
rinse
Use for normal soiled dishes with dried-on
food. Senses the level of soiling on the dishes
and adjusts the program accordingly. When
the sensor is detecting the soil level an
animation appears in the display and the
cycle duration is updated. The PowerClean
®
option is activated automatically with this
program. To deactivate, press the
PowerClean
®
button on the control panel.
X 7-15 1.00-1.70 70-172 Full
P2
Glass 40°C
Delay Light soiling, for example glasses and cups. X 10.5 0.85 105-114 Light
P3
Express 45°C
Delay
Lightly soiled crockery, with no dried-on
food.
X 11.0 0.85 30-50 NO
P4
Eco
2)
50°C
Delay
PowerClean
®
Antibacterial
rinse
Normally soiled crockery.
Standard Program the most efficient in
terms of its combined energy and water
consumption.
X 9.0 0.92 240 Full
P5
Normal 60°C
Delay
Antibacterial
rinse
Normally soiled crockery. X 11.0 1.30 80-95 Full
P6
Night 50°C
Delay
Normally soiled crockery, gentle and quiet
thanks to the lower spray pressure (39 dbA).
X 14.0 1.20 290-299 Light
5019 400 00785
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS
QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
Options and display description
WASH TIME DISPLAY
Indicated the cycle duration and the remaining time (h:min). With “Delayed start” selected it indicates
the time remaining until program start (h.00) - below 1h (0:min).
If “Fx Ey” messages appears on the display, see page 6 - chapter “What to do if...”.
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY
BUTTON EXCEPT CANCEL/OFF BUTTON. FOR ENERGY SAVING THE
CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER
30 SECONDS IF NO CYCLE HAS STARTED.
POWERCLEAN
®
Thanks to the additional power
jets this option provides a more
intensive and powerful wash in
the lower rack, in the specific
area. This option is
recommended for washing pots
and casseroles (see page 4).
Press this button to activate
PowerClean
®
(the indicator
lights up).
For non PowerClean
®
loading to
achieve best cleaning
performances and resources
optimization, PowerClean
®
should be switched off.
SALT INDICATOR
When lit (at the end of the cycle), the
salt reservoir needs to be refilled.
RINSE AID INDICATOR
When lit (at the end of the cycle), the
rinse aid dispenser needs to be refilled.
TABLET SETTING
This setting allows to
optimize the cycle
performances according
the type of detergent
used. Push the Tablet
button for 3 seconds (until
the indicator lights up)
if you are using the
combined detergents in
tablet (rinse aid, salt and
detergent in 1 dose).
If you are using powder
detergent or liquid
detergent, the Tablet
indicator on the control
panel has to be off.
DELAYED START
BUTTON
Push the button
(repeatedly) to delay the
start of the program.
Adjustable from 1 to 24
hours. With each press of
the button, the delayed
start indicator increases
by one hour and after
24 restarts from 0.
Then press the START
button. The dishwasher
will start after the set
time.
ANTIBACTERIAL RINSE
This function activates an antibacterial
rinse at the end of the wash cycle,
guaranteeing a further reduction of
bacteria. Press the button to activate or
deactivate the function. This function
can be used with the programs
indicated in the table of programs. The
dishwasher door must be kept shut for
the entire duration of the program in
order to guarantee reduction of
bacteria. If the door is opened the
indicator lamp starts flashing.
OPERATION
INDICATOR
A LED light
projected on the
floor indicates that
the dishwasher is
working.
Quick reference guide
Bauknecht is a registered trademark
(12 pages)
(8 pages)
(8 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals