Bauknecht KGNF 20P A3+ IN User's Guide download pdf (Page 3)

that this function does not disconnect the appliance from the

power supply, but only reduce the power consumed by external

display.

FREEZE CONTROL

Freeze Control is an advanced technology that reduces

temperature uctuations in the whole freezer compartment to

minimum, thanks to an innovative air system, totally

independent from the fridge. Freeze burns are reduced up to

60% and food preserves its original quality and color.

To activate/deactivate the Freeze Control function press and

hold for 3 seconds the Party Mode button.

The function works properly in a dened range of temperature:

between ‐22°C and ‐24°C. When the function is engaged and

the current temperature in the freezer is set to the warmer set

point than ‐22°C, the temperature is automatically set to ‐22°C

to match the working range.

If the function is engaged and the user modify the freezer

temperature out of the working range, the function is

automatically switched o.

In case of Fast freezing is engaged, the function “Freeze control”

is inhibited until the Fast Freezing function switched o.

PARTY MODE

Press to activate/deactivate the Party Mode function.

Use this function to chill drinks inside the freezer compartment.

Important: do not leave the bottle inside the freezer

compartment longer than the function is active (30 minutes).

FAST COOL

Using Fast Cool function it is possible to increase the cooling in

the refrigerator compartment. The use of this function is

recommended when placing a very high quantity of food in the

refrigerator compartment. Press & hold for 3 sec. the Fridge °C

button to activate Fast Cool function. When activated, the Fast

Cool indication will be displayed by the Fridge Temperature

LEDs as shown in the beside sequence. The function is

automatically disabled after 6 hours, or can be manually

disabled by pressing Fridge °C button.

FAST FREEZE

The use of this function is recommended when placing a very

high quantity of food to be frozen in the freezer compartment.

24 hours before freezing fresh food, press & hold for 3 sec. the

Freezer button to activate the Fast Freeze function.

When activated, the Fast Freeze indication will be displayed by

the Freezer Temperature LEDs as shown in beside sequence.

After 24 hours place the food to be frozen in the upper basket

of freezer compartment. The function is automatically disabled

after 48 hours, or can be manually disabled by pressing Freezer

°C button.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches on

when the refrigerator door is opened. If the door is kept open

for more then 10 minutes the light will be automatically

switched o.

FAN + ANTIBACTERIAL FILTER

The Fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food.

If the appliance has the Fan it can be equipped with the

antibacterial lter.

Remove it from the box placed in the crisper drawer and insert

into the fan cover - as in the picture.

The replacement procedure is included in the lter box.

ALARM TABLE

ALARM TYPE Signal Cause Cure

Door open

alarm

The acoustical alarm is activated and the

Alarm Indicator blinks.

The Fridge or Freezerdoor has

remained open for more than 2

minutes.

Close the door or press the Stop Alarm to

mute the acoustical alarm.

Temperature

alarm

The Temperature display blinks (°C) and

the Alarm Indicator remains on.

The inside temperature is not

adequate.

Press the Stop Alarm button ; the acoustical

alarm stops, the Temperature Display

(°C) blinks and the Alarm Indicator remains on

until a temperature < -10°C is reached.

Long black-out

alarm

The Black Out Alarm icon remains on, the

Alarm indicator blinks and the

Temperature display (°C) blinks, showing

the maximum temperature reached

during blackout

Prolonged power failure, able

to cause the inside temperature

to increase to 0°C.

Press the Stop Alarm button; the acoustical

alarm stops, the Temperature Display (°C)

blinks and the Alarm Indicator remains on

until a temperature < -10°C is reached.

Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.

1 2 3 4

Comments to this Manuals

No comments

Bauknecht KGNF 20P A3+ IN User's Guide Page 3

Comments to this Manuals

Related products and manuals for Unknown Bauknecht KGNF 20P A3+ IN