Bauknecht KGNF 18 A3+CONNECT Use and Care Guide download pdf (Page 23)

23

EN

The Active 0 compartment is

specically designed to maintain a

low temperature and a suitable

humidity level, in order to keep foods

fresher for longer (e.g. meat, sh, fruit

and winter vegetables).

ACTIVATING AND DEACTIVATING

THE COMPARTMENT

To activate/deactivate the Active 0

compartment, press the dedicated

button on the control panel ( indicator

in the gure below).

Active 0 compartment o:

button partially lighted

Active 0 compartment ON:

button fully lighted

When activated, the lighting bar on

the Active 0 compartment lights up.

The temperature inside the

compartment/drawer, when active, is

approximately 0 degrees.

The following factors are vital for the

compartment to work properly:

-the temperature of the refrigerator

compartment must be switched

between +2 °C and +4°C.

-the compartment must be inserted

to enable activation

-no special function must have been

selected (as Standby, Vacation

mode – where applicable).

If one of these special functions has

been selected, the fresh food inside

the Active0 compartment should be

removed.

Note:

- if the lighting bar and symbol does

not light up but the the symbol blinks

when the box is being activated,

check that the box is properly

inserted; When the drawer is inserted,

the function is able to activate again

after few seconds by simple pressing

the button. if the problem persists,

contact your nearest authorized

After-sales Service

- if the Active 0 compartment is active

and the drawer is open, more than 2

minutes, the function is deactivated

automatically. After the drawer is

inserted, the function is able to

activate again after few seconds by

simple pressing the button.

- irrespective of the state of the box, a

slight noise may be heard: this is

normal and is not a cause for concern.

- when the box is not active, the

temperature inside it depends on the

general temperature inside the

refrigerator compartment.

In this case, we recommend it is used

to store fruit and vegetables which are

not sensitive to cold temperatures

(fruits of the forest, apples, apricots,

carrots, spinach, lettuce, etc.).

Important: when the function is

activated and there are foodstus

with a high water content,

condensation may form on shelves.

Attention:

• Incompatibility with the

“Vacation” function

To guarantee optimal performance,

the “Vacation” and “Active 0”

functions cannot be used at the same

time.

Therefore, if the “Vacation” function

has been already engaged, it has to be

disengaged rst to activate the “Active

0” function (and viceversa).

REMOVING THE ACTIVE 0

COMPARTMENT

The Active 0 compartment can be

removed to create more space inside

the refrigerator. In this case proceed

as follows:

- switch o the

compartment

- pull out the drawer

- pull out the glass

shelf below Active 0

- remove the white plastic insulation

form the glass shelf

ACTIVE 0

COMPARTMENT

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 48 49

Comments to this Manuals

No comments