Bauknecht KSN 19 A2+ IN User's Guide download pdf (Page 2)

FUNCTIONS

ON/OFF

The entire product (both the refrigerator and freezer

compartments)

may be switched on by pressing this button for 2 seconds.Last set

values are display at screens. Press this button till the switching o

of the product.A signal sound will inform the switching o of the

product

REFRIGERATOR TEMPERATURE SETTING

Used to modify the temperature setting of the refrigerator;

con-rmation corresponding to the selected temperature appears

on the display. To change them, simply press the - and + buttons.

The temperature values that may be selected are

+8°C,+7°C,+6°C,+5°C,+4°C, +3°C and +2°C.

FREEZER TEMPERATURE SETTING

Used to modify the temperature setting of the freezer; conrmation

corresponding to the selected temperature appears on the display.

To change them, simply press the - and + buttons. The temperature

values that may be selected are -18°C, -19°C, -20°C, -21°C, -22°C,

-23°C-24°C -25°C and -26°C.

ENERGY SAVING FUNCTION

This optional function can be used to save energy. Under

these conditions, the display remains o even when the door is

opened. The function is activated by pressing and holding the

SUPER FREEZER and FREEZER (+) buttons simultaneously for at least

6 second. Once the function has been activated, all LEDs will light

up for 2 seconds to conrm activation, and the temperature setting

of +5, -18 will appear on the display. The display switches o after 5

seconds. To change the temperature, simply press the + and –

buttons until you have reached the desired temperature.

The Energy Saving function can also be disabled by switching the

product o using the ON/OFF button. When it is switched back on,

the Energy Saving will be disabled. In humid environments, when

the Energy Saving function is enabled, slight condensation may

form on the appliance door; normal operating conditions are

restored when the function is dis- abled.

SUPER FREEZE

The use of this function is recommended when placing a

very high quantity of food to be frozen in the freezer compartment.

Press the SUPER FREEZE button to enable or disable the function.

and ‘SF’ appears on the freezer display. Activate the SUPER FREEZE

function 24 hours before placing the food in the freezer. After

placing the food inside, activate the SUPER FREEZE function again;

it will be deactivated automatically after 24 hours. If SUPER FREEZE

functions is activated, Freezer temperature can- not be modied.

SUPER COOL

Using Fast Cool function it is possible to increase the cooling

capacity in the refrigerator compartment. The use of this function is

recommended when placing a very high quantity of food in the

refrigerator compartment. Press the Fast Cool button to activate

Fast Cool function).

and ‘SC’ appear on the refrigerator display.

When the inside of the compartment has reached its optimal

temperature, the function will be deactivated automatically. If

SUPER COOL function is activated, Fridge temperature cannot be

modi- ed.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the Service to

replace it.

SHELVES:

Due to the special guides the shelves are removable and the height

is adjustable, allowing easy storage of large containers and food.

TEMPERATURE INDICATOR *:

Temperature indicator informs you if the temperature in this cavity

is cold enough for storage with the word “OK”.

1.Check that OK appears clearly on the indicator light (see the

picture below).

2. If the word “OK” does not appear it means that the temperature

is too high: set a lower temperature and wait approximately 10

hours until the temperature has been stabilised.

3. Check the indicator light again: if necessary, readjust it following

the initial process. If large quantities of food have been added or if

the refrigerator door has been opened frequently, it is normal for

the indicator not to show OK. Wait at least 10 hours before

adjusting the REFRIGERATOR OPERATION knob to a higher setting.

FIRST TIME USE

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the operation

automatically. After starting the appliance, wait at least 4-6hours

before placing food into the fridge and into the freezer

compartment.

When the appliance is connected to the power supply, the display

lights up and all the icons appear on the display for approximately

1second. The default (factory) values of the fridge compartment

settings light-up.

ACCESSORIES

WINE RACK EASY ICE

DAILY USE

See Use and Care Guide for more details on functions / see last page for

information on how to obtain the Use and Care Guide

1 2 3 4

Comments to this Manuals

No comments

Bauknecht KSN 19 A2+ IN User's Guide Page 2

Comments to this Manuals

Related products and manuals for Fridge-freezers Bauknecht KSN 19 A2+ IN