Bauknecht GCX 4862 Instruction for Use Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
49
Wash Cycle Table
NOTE
Means: need to fill rinse into the Rinse-Aid
Dispenser.
* This programme is the test cycle. The
information for comparability test in
accordance with EN 50242, as follows:
Capacity: 9 setting;
Position Upper basket: upper wheels on rails
Rinse aid setting: 6
Pl: 0.49w;
Po: 0.45w.
STARTING A WASHING PROGRAMME
Program
Cycle selection
information
Description
of cycle
Detergent
pre/main
Running
time (min)
Energy
(Kwh)
Water
(l)
Rinse
Aid
Intensive
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
Pre-wash (50°C)
Wash (65°C)
Rinse
Rinse
Rinse (65°C)
Drying
5/22g 135 1.3 16
Normal
For normally soiled loads,
such as pots, plates, glasses
and lightly soiled pans.
Pre-wash (45°C)
Wash (55°C)
Rinse
Rinse (65°C)
Drying
5/22g 155 1.07 13
.
* EN 50242
This is standard programme,
it is suitable to clean
normally soiled tableware
and it is the most efficient
programme in terms of its
combined energy and water
consumption for that type of
tableware.
Pre-wash
Wash (50°C)
Rinse (65°C)
Drying
5/22g 175 0.83 9
Glass
For lightly soiled crockery
and glass.
Pre-wash
Wash (40°C)
Rinse
Rinse (60°C)
Drying
5/22g 110 0.7 13
1 Hour
For lightly soiled loads that
do not need excellent drying
efficiency.
Pre-wash (50°C)
Wash (60°C)
Rinse (55°C)
Drying
5/22g 60 0.85 9
Express
A shorter wash for lightly
soiled loads and quick wash.
Wash (40°C)
Rinse
Rinse (45°C)
20 g 40 0.45 10
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled “Loading
the Dishwasher”).
2. Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4. Close the door, press the ON/OFF Button, and the ON/OFF light will turn on.
5. Press the program Button , the wash program will be changed as follows direction:
Intensive->Normal->ECO->Glass->1Hour->Express;
If a program is selected, the response light will light. Then press the Start/Pause Button, the dishwasher
begins to start.
Page view 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 131 132

Comments to this Manuals

No comments