6
LOADING THE RACKS
CUTLERY RACK
The third rack was designed to house
the cutlery.
Arrange the cutlery as shown in the
figure.
A separate arrangement of the cutlery
makes collection easier after washing
and improves washing and drying
performance.
Knives and other utensils with sharp
edges must be positioned with the blades facing downwards.
The geometry of the rack makes it
possible to place such small items as
coffee cups in the area in the middle.
The cutlery basket is equipped with
two sliding side trays to make the most
of the height of the space below and
enable the loading of high items into
upper rack.
UPPER RACK
Load delicate and light dishes: glasses, cups, saucers, low salad bowls.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high position to place
bulky crockery in the lower basket and low position to make the most
of the tip-up supports by creating more space upwards and avoid
collision with the items loaded into lower rack.
The upper rack is equipped with a Upper
Rack height adjuster (see figure), without
pressing the levers, lift it up by simply
holding the rack sides, as soon as the rack is
stable in its upper position.
To restore to the lower position, press the
levers A at the sides of the rack and move
the basket downwards.
We strongly recommend that you do not
adjust the height of the rack when it is
loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be positioned at
three different heights to optimize the
arrangement of crockery inside the rack.
Wine glasses can be placed safely in the foldable
flaps by inserting the stem of each glass into the
corresponding slots.
For optimum drying results incline the foldable
flaps more. To change the inclination, pull up
the foldable flap, slide it slightly and position it
as you wish.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids
should ideally be placed at the sides to avoid interferences with the
spray arm.
(loading example for the lower rack)
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
POWER CLEAN IN LOWER RACK
Power Clean® uses the special water jets in the
rear of cavity to wash more intensively the high
dirty items. The lower rack has a Space Zone, a
special pull-out support in the rear of the rack
that can be used to support frying pans or baking pans in upright
position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean® component
please activate the POWER CLEAN on the panel.
How to use Power Clean®:
1. Adjust the Power Clean® area
(G) folding down the rear plate
holders to load pots.
2. Load pots and casseroles
inclined vertically in Power
Clean® area. Pots have to be
inclined towards the power
water jets.
(8 pages)
(8 pages)
(12 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals